HP psc – multifunction printer color qaabp. On HP psc the Full Reset can be done by pressing both the buttons “cancel” orange button and “down” while plugging in the power cord cheers. Here’s a different approach that helped me get rid of the grinding noise: Finally, a multifunction inkjet printer with low-cost ink refills Finally, a multifunction inkjet printer with low-cost ink refills by Justin Yu. With reading the messages, I realized it may not be so bad. Tablets by Dan Ackerman 8 days ago.
|Date Added:||9 July 2004|
|File Size:||7.28 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
HP psc 2175 scanner jam
Bezel – PSC series control panel bezel French. After about 2 weeks of inactivty and spc unplugged, I was ready to buy another printer but I plugged in one last time and pxc started working again. Roller Exit – Paper exit rollers – out put assembly. I opened the printer up and cleaned the glass etc, then when I put the printer back together again, it won’t turn on. I just fixed my printer with the following steps when doing the factory reset didn’t fix anything: I hope someone can tell me which way I should go.
I was about to take the whole thing apart and use brute force and ignorance until I read this thread!!
Definitely just take it apart and clean it. Thanks for the thought though.
Scxnner – Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. The scanner tries to read the white stripe at the bottom of the glass cover.
Cable Interface – Parallel cable – connects from your printer to computer via your parallel port.
I read your problem and threads and solved the problem only having to clean the underside of the glass, especially the area over the reset strip; the whole unit was in quite a dirty condition. Adf Input Tray – ADF h; for automatic document feeder this is where scannee are placed for feeding into unit.
Instead, I ended up getting the cover off by pulling it upwards. I’ve done all you have said I solved the scanner grinding problem by just disconnecting the power and USB cable for several minutes, nothing more.
HP Customer Support – Software and Driver Downloads
Motor Service Station – Service station stepper motor does not include cable – moves the rack vertically in the service station assembly. Okay, just if anyone looks here, i manged to fix the problem.
Thanks again – unknown. Thought my was ready for junk. If that doesn’t cure the problem clean the underside of the glass, giving particular attention to the white strip.
Thus, the warranty has been removed from this product. In the beginning when I removed that glass to clean it, I then installed it upside down in its plastic frame!!!
I just cleaned the glass and it worked!!! When that’s off, you have access to the three retaining screws. I was surprised at how easy it was.
HP psc – multifunction printer (color) Overview – CNET
Pinchwheel – Pinch assembly kit – includes all required pinch wheels, pinchwheel mounts scanenr springs. Guide Paper – Upper paper guide – spring loaded flat plate that presses the media against the top of the feed roller assembly – caution: Monthly Duty Cycle max.
There was no help on HP’s website, it was as though they didn’t acknowledge the scanner problem exists. Lower feed roller assembly – for lower paper input tray. IF you want to know why the 2157 is necessary read on: It was only after I discovered, and cleaned, the two mirrors under the scanner bar that my printer went back to functioning properly.
If that fails nothing more can be done. I googled and not finding much.