Best Displays , for University Students. Get involved Libre Music Production is a community driven project. You can find more answers in our FAQ section. In order to receive objective measurements we used the software Arta and the RightMark Audio Analyzer with Loop cables to test the soundcard. The interfaces are allocated on the front and back side and the built-in rubber dial prevents wobbling and has a pleasant haptic.

Uploader: Brashura
Date Added: 13 May 2008
File Size: 32.34 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 17455
Price: Free* [*Free Regsitration Required]

Colleagues of other media were also satisfied with the external soundcard’s sound quality. If your preferences show single-track recording then you might get this: If you have to practice with headphones and are using a modelling amp, like a Fender Mustang, you can do any of the following: There dmx6fite a slight improvement perceptible in comparison to the integrated soundcard of the 2.

The firmware is another story.

Terratec DMX 6Fire USB review | MusicRadar

There is a further dmx6ire with YaSTthe Suse admin valet. To record a masterpiece with Audacity as before we go as follows: Two LEDs per connection provide the optical feedback. Note that the 6fire guitar jack is NOT for acoustic microphones regardless of what instrument they might be used with! The center sounds a bit fuller and the rear surround channels somewhat muffled. These could quickly and without problems be fixed by removing and re-inserting the sound card but doesn’t really speak for the existing drivers, either.


TerraTec SoundSystem DMX 6fire, USB

Please change the samplerate to 48 kHz while watching Dmx6fiire. Internet Reviews Following reviews were found in the internet while writing this report and may contribute to a purchase decision: The line below the input is the output from the command that you will see in your terminal. Furthermore, an automatic coding of 5.

In case the stereo source of the 5. If you have to practice with headphones and are using a modelling amp, like a Fender Mustang, you can do any of the following:. Contents of the retail version. Jan Version 1. Furthermore, the back side has ports for digital dmc6fire with MIDI ports input and output and of course the power socket for the adapter and the USB 2.

In the above exercise I isolated down to the 6Fire to make sure that it was the one being used. The 6fire headphone output can of course also serve headphones.

Review Terratec DMX 6Fire USB Soundcard

What impedances and which output voltage do I need for the best performance of the phono input? YaST is trying to dmxfire the wrong driver kernel module Load Audacity and observe that the dropdown menus resemble what is shown here; namely that the 6Fire is ready as a MIC input for recording as well as as a sound output.


This was measured with a loud sine wave calibrated to -3 dB by Arta and the integrated routine in the Audio Analyzer. Arta – Frequency Response. Arta – Headphones to Microphone – Frequency Response.

Therefore you might have to budget a few Euros for a second one. The outputting of 5. When compared to audio output through dmx6fkre iMac’s headphone jack, it was brighter, punchier and had a wider dynamic range.

What can I do if the control panel can not access the hardware? Can I uplink to other DMX 6fire devices?

With the resulting normal setup Audacity will give the option to use whatever soundcard might suit your fancy for output. In addition to this, we also measured the connections on the front.